Generation² Wi-Fi troubleshooting

For Generation2 instruments (pre 2018). For current instruments, see Wi-Fi troubleshooting.

To have Wi-Fi capabilities for the Generation2 instruments, you will need:

  • The twist activation feature

  • The red Wi-Fi module

If the connection to Wi-Fi fails, try the following:

  1. Inspect the 30-pin connectors (early Apple iPhone style) to see if there are any bent or damaged pins. A bend in the edges or debris blocking a connection could also cause an issue. The most difficult damage to see will be a bow in the bottom edge of the connector or a broken-off pin, but they should be visible to the eye.

  2. Try to connect to your instruments using a different device. If you are currently using your computer to connect to the instruments, you could try connecting to the Ruskin mobile app on your phone.

  3. Keep the Wi-Fi signal close to what you are trying to connect to and away from other signals.

    In a populated and busy area, the Wi-FI connection might fail due to interference with other Wi-Fi signals.

  4. Try different Wi-Fi modules with different instruments. A damaged module will not work with any instruments.

Carefully assess the modules and connectors before switching them out to test with another instrument! A badly damaged pin on one connector could damage the other unit as well.